Player Manual
Preface
Thank you for purchasing HoneyCome for Windows 10/11.
Be sure to read this manual before playing the game.
Be sure to read this manual before playing the game.
Terms of Service
Make sure to read this before playing.
We recommend backing up your hard drive and your game, and that you use your best judgment in the game's operation.
○This game is a work of fiction!
Any names, organizations, locations, or events appearing in this game are fictitious. Any resemblance to real names, organizations, locations, events, etc. is purely coincidental.
This game is only intended for mature audiences of ages 18 and above. The purchase and play of it by minors under the age of 18 is expressly forbidden.All characters appearing in this game are over the age of 18.
In addition, uploading or sharing this game on the Internet is expressly forbidden, as is the rental or resale, or any equivalent act.
○Streaming, distributing, selling, using this program for profit, and other similar uses are prohibited.
ILLGAMES holds the rights to all data created with this game, such as character data or game screenshots.
○This game includes scenes of graphic violence and criminal acts. Do NOT attempt to mimic or reproduce the things you see in this game in real life.
All acts depicted in this game are fully and mutually consensual, and completely fictional. Attempting to perform the actions seen in this game in real life may result in criminal litigation or arrest.
○For health purposes, we recommend taking 10 to 15 minute breaks for every 1 to 2 hours you play.
Consult with a physician before playing if you have ever experienced temporary loss of consciousness or seizures when watching TV, or as a result of any other strong source of stimulation.
If you experience these symptoms while playing, immediately turn off the game and consult with a physician.
Note: While all ©/™ symbols have been removed, all trademarked product names are the property of their registered owners.
DISCLAIMER
○ILLGAMES may not be held responsible for any problems, losses, or damages incurred by the use of this game. We recommend backing up your hard drive and your game, and that you use your best judgment in the game's operation.
○This game is a work of fiction!
Any names, organizations, locations, or events appearing in this game are fictitious. Any resemblance to real names, organizations, locations, events, etc. is purely coincidental.
This game is only intended for mature audiences of ages 18 and above. The purchase and play of it by minors under the age of 18 is expressly forbidden.All characters appearing in this game are over the age of 18.
PROHIBITED ACTIONS
○The unauthorized reproduction or distribution of all or part of this game, game data, or manual is illegal.In addition, uploading or sharing this game on the Internet is expressly forbidden, as is the rental or resale, or any equivalent act.
○Streaming, distributing, selling, using this program for profit, and other similar uses are prohibited.
ILLGAMES holds the rights to all data created with this game, such as character data or game screenshots.
○This game includes scenes of graphic violence and criminal acts. Do NOT attempt to mimic or reproduce the things you see in this game in real life.
All acts depicted in this game are fully and mutually consensual, and completely fictional. Attempting to perform the actions seen in this game in real life may result in criminal litigation or arrest.
WARNING
○Do not sit or stand too close to your monitor.○For health purposes, we recommend taking 10 to 15 minute breaks for every 1 to 2 hours you play.
NOTICE
○Playing games while tired or for long periods of time can be bad for your health. Remember: Your health comes first!Consult with a physician before playing if you have ever experienced temporary loss of consciousness or seizures when watching TV, or as a result of any other strong source of stimulation.
If you experience these symptoms while playing, immediately turn off the game and consult with a physician.
Note: While all ©/™ symbols have been removed, all trademarked product names are the property of their registered owners.
System Requirements
-
- Required
- Recommended
- OS
- Windows 10 / 11 64bit *1
- DirectX
- DirectX 11
- CPU
- Intel Core i3 8100 *2
- Intel Core i7 8700 *2
- RAM
- 8GB
- 16GB
- HDD
- 20GB
- GPU
- NVIDIA GeForce GTX 1060 or AMD Radeon RX 480 or better *3
- VRAM
- 3GB *4
- 6GB
- Network
- Requires an Internet connection.
- Peripheral Equipment
- Mouse (w/ mouse wheel), keyboard, monitor with resolution 1280 x 720 or higher (16:9 aspect ratio only)
-
*1 32-bit systems, touch controls, and virtual machines are not supported.
*2 Intel CPUs are recommended.
*3 A graphics card is required to play this game. Integrated graphics or a graphical system of similar power is not supported.
*4 If only 3 GB of VRAM is available, please adjust the Quality setting under Graphic Settings in the Options menu.
Caution: We may be unable to provide support for used or home-built PCs.
Caution 2: Performance of this game on a laptop may be worse than on a desktop listing the same PC specs.
Caution 3: Performance cannot be guaranteed on any OEM PC that has had its drivers updated or parts replaced.
With all that being said, ILLGAMES will do its best to provide friendly and helpful customer support. However, we cannot guarantee this game's performance on every possible combination of PC part or driver.
・For troubleshooting problems with your computer, please contact your computer's manufacturer.
•Be aware that the amount of unused hard drive space required may vary by system.
•The game may not function properly with out-of-date drivers, even if your system meets the game requirements.
[PC information]
(1) Right-click the Windows mark at the bottom left of the screen => Select "Run".
(2) Type dxdiag in the entry field and press "OK".
(3) Press the "Save all information" button to save the information.
(4) Please send "dxdiag.txt".
Installing the Game
-
①Open the HoneyCome folder.
*For more information or questions on how to download and unpack this title, see the official product webpage.
②Right-click "Startup.exe" → select "Run as administrator".
③Select "Install HoneyCome" on the window that appears to begin installation. Follow the instructions that appear on screen to finish the installation.
*Installing the game to certain specialized folders, such as system folders in "C:\Program Files" or backup partitions, may prevent data from saving correctly.
*We recommend that you avoid installing in these locations, and install HoneyCome into the default installation folder.
④Once the installation is complete, the HoneyCome icon will appear on your desktop.
Double-click the HoneyCome icon to launch the game.
*Once this game has been installed, you do not need to install it again.
*Installation may take up to or longer than one hour, depending on your computer's specifications.
The installation bar may immediately fill but then appear to stop, or a message indicating your system is not responding may appear. We recommend waiting in both of these cases, as the installation may still be progressing without error.
Uninstalling the Game
①Use "Uninstall a program" or "Apps & features" in Windows to uninstall ILLGAMES HoneyCome.
②After uninstallation is complete, open the HoneyCome installation folder and delete any remaining files. *The default installation folder is "C:\ILLGAMES\HoneyCome".
②After uninstallation is complete, open the HoneyCome installation folder and delete any remaining files. *The default installation folder is "C:\ILLGAMES\HoneyCome".
Using Demo Data
Character cards created in HoneyCome Trial Version can be used in the full version of this game.
①Open the HoneyCome Trial Version character data folder.
*This refers to the "chara" folder within the "UserData" folder.
②Right-click the "female" folder → select "Copy" to copy the data.
③Open the full version of the game's character folder.
*This refers to the "chara" folder within the "UserData" folder.
④Right-click on an empty space in the folder → select "Paste" to paste the data.
⑤Character card data in this folder will automatically be converted when this game starts.
①Open the HoneyCome Trial Version character data folder.
*This refers to the "chara" folder within the "UserData" folder.
②Right-click the "female" folder → select "Copy" to copy the data.
③Open the full version of the game's character folder.
*This refers to the "chara" folder within the "UserData" folder.
④Right-click on an empty space in the folder → select "Paste" to paste the data.
⑤Character card data in this folder will automatically be converted when this game starts.
Basic Controls
- ○Windows Controls
-
The following are descriptions of the basic game controls used in this manual.
①Left-Click : Press the left button on your mouse. ②Left-Click (Drag) : Press and hold the left mouse button and move the mouse.
We often use the phrase "select the (X)" in this manual. For clarification, this is defined as moving your mouse to the item indicated by (X), then left-clicking it.
For Example: The sentence "Select the Confirm button" indicates that you should move the mouse pointer over the Confirm button and left-click it.
Note: Some operations may ask you to copy, move, or delete files from your computer. If you do not know how to perform these operations, please contact your computer manufacturer for help.
- ○Camera Controls
- The camera can be controlled in the character creation and sex scenes as long as the mouse cursor is not over a menu or button.
- ○Adjusting the Slider/Colors
- When adjusting slider variables using the mouse, you can also adjust the color by using the color panel. Note that the mouse cannot be used to adjust transparency in this way, as there is no transparency option on this screen.
- ○Resetting Defaults
- Use this button to quickly reset any modified settings to their defaults.
- ○Check Boxes
- Check boxes allow you to toggle options between ON and OFF.
- ○Switching Categories
- Spinning the mouse wheel while over certain menu options or icons (Sex Position Icon, Map Selection, etc.) allows you to adjust them.
The User Folder
-
The "UserData" folder can be found in the install directory for HoneyCome. The game's saved data is stored across several folders nested within it.
-
[ bg ]Add any custom backgrounds* you want to use in Character Creation here.
*Only images in the .png format are supported. A 16:9 aspect ratio is also recommended.
[ cap ] This folder contains screenshots taken with the game's screenshot function.
[ cardframe ] Foreground and background frames used in Character Creation are stored here.
Foreground frames are stored in the "Front" folder, and background frames are stored in the "Back" folder.
[ coordinate ] Stores the custom clothing sets saved in the Character Creation.
-
[ chara ]Stores character data that has been saved.
Note: Within this folder, characters are divided into the "female" and "male" folders, depending on the gender of the character created.
[ save ] This folder contains your saved game progress.
[ ScreenEffect ] This folder contains the setting file for visual effects.
Title Screen
-
■ PlayThis button starts the game. The first time you do so, you'll be taken to a tutorial. After that, the game will start in the My Room screen.
■ Character CreationCreate custom characters to use in-game here.
•FemaleOpens the Character Creation screen for female characters.
•MaleOpens the Character Creation screen for male characters.
•BackReturns to the previous screen.
■ UploaderShare your character data online.
•Uploading Use this to upload your character data.
•Download Use this to download character data shared online.
•BackReturns to the previous screen.
■ Free SexChoose a map and have sex with the girl of your choosing, no strings attached.
■ OptionsAllows you to adjust game settings.
■ LanguageChanges the game language.
■ Exit GameExits the game.
Character Creation
■The Character Creation Screen
-
①NameDisplays the name of the character currently being edited.
Character name can be changed in the Character Settings section of the Options menu.
②Main MenuThe various customization categories. Select a button to open a more detailed list. (See "③Customization Options.")
*From left to right: Face, Body, Hair, Outfit, Accessories, Settings
③Customization OptionsDisplays the sub-categories for the category selected in ②Main Menu.
Clicking one will bring you to the ④Customization Panel.
④Customization PanelCustomize the sub-category selected from the ③Customization Options menu here.
The many different customization options can be adjusted with buttons, sliders, etc.
For more information, see Adjusting Facial and Body Features, Selecting Types and Colors, and Accessory Settings.
Click (x) to hide the window. To display the window again, select the Customization Option again.
Additionally, windows with (x) in the corner can be moved by left-clicking and dragging on the top of the window where the (x) is not displayed.
⑤Character ViewerDisplays the character currently being edited. Use the camera controls to rotate and view this character from any direction.
⑥Display OptionsAdjust various aspects of the character viewer, such as the character's expression and pose, the lighting, and the background image.
Note that this is for viewing purposes only, and will not change how the character appears in the game.
⑦BackExits the Character Creation screen.
Warning: Unsaved data in the character viewer will be lost.
■Adjusting Facial and Body Features (Sliders): Sliders are used to adjust the shape and size of facial and body features. The following is an example of how to use them to adjust a character's body.
-
① Category SelectionSelect the Body icon from the Main Menu.
② Subcategory SelectionSelect the option you want to adjust from the menu on the left.
③ Slider AdjustmentAdjustable components and sliders will be displayed.
Sliders can be adjusted directly or by entering a value to the slider's right.
All sliders in the Facial and Body Features are adjusted in the same way.
■Selecting Types and Colors: Many options include sub-options to adjust their type or color. The following is an example of adjusting these properties for bangs.
-
① Category SelectionSelect the Hair icon from the Main Menu.
② Subcategory SelectionSelect "Bangs Settings" from the menu on the left.
③ Option Menu SelectionSelect "Type" from the Customization Panel.
④ Option SelectionA list of bang options will be displayed. Select a type of bangs.
⑤ Color Menu SelectionSelect "Color" from the Customization Panel.
⑥ Color SelectionSelect the option showing color for an item you want to adjust.
⑦ Color AdjustmentThe Color Panel will be displayed. Use the Picker, Sliders, or Presets to change the color.
・Some clothes and accessories also have secondary color options.
・Some items have a transparency option. Adjust this with the "Transparency" slider.
■Customizing Hair:Entirely new hairstyles can be created by adjusting hair settings. Note that some hairstyles have different customization options.
-
① Category SelectionSelect the Hair icon from the Main Menu.
② Subcategory SelectionSelect the hairstyle to adjust from the Customization Panel.
③ Option Menu SelectionSelect "Settings" from the Customization Panel.
④ Position AdjustmentCustomize settings here to adjust the selected hairstyle.
- ■The Axis: You can directly control object position with the Axis.
-
①Enable the Axis.An axis controller will appear when you enable the "Axis" box.
※With this enabled, you can left-click and drag the mouse to move and rotate the selected section of hair.
②Move/RotateSwitches between types of Axis movement.
③Speed/Size・Speed Affects how quickly the object will move when manipulated.
•Size Affects the size of the Axis.
- Sample Hair: This sample uses the Curly Side Bangs hairstyle for the Bangs.
- ■Mesh: By customizing a mesh for the bangs, you can adjust them in various ways. For example, by adding color to one specific segment.
-
① Mesh Color SelectionSelect "Set Mesh Color" from the "Hair Settings" panel.
② Color SelectionSelect "Color."
③ Color AdjustmentChoose a mesh color from the Color Panel.
■Clothing Settings: Shirts, underwear, and other clothing types can be customized from this screen.
-
① Category SelectionSelect the clothing category to edit from the menu on the left.
② Subcategory SelectionSelect "Top" from the menu on the left.
③ Clothing SelectionSelect "Type" from the "Top Settings" panel.
④ Option Menu SelectionSelect "Type" from the Customization Panel.
⑤ Option SelectionPick clothing from the list displayed.
⑥ PatternsSelect "Pattern" (etc.) to customize the color/pattern of that part of the outfit.
Note that some items have different color customization options.
■Accessory Settings: A maximum of 20 accessories can be worn at any time, and their size and position can be customized. The following example shows how to move glasses to a character's head.
-
① Category SelectionSelect the Accessories icon from the Main Menu.
② Slot SelectionSelect a slot. In this example, Slot 01 is selected.
③ Display Category ListSelect an accessory category. In this example, "Face" is selected.
④ Option Menu SelectionSelect "Type" from the Customization Panel.
⑤ Setting Menu SelectionType, color, position, and more are all separated by easy-to-use tabs.
In this example, "Type" is selected.
⑥ Option SelectionA list of accessories will be displayed for the selected category. Select an accessory.
⑦ Display Customization MenuSelect "Settings."
⑧ Position/Size AdjustmentVarious customization options are displayed. Here, we will adjust settings in "01 Settings."
Adjust the various X, Y, and Z positions by left-clicking and dragging, or by entering a value.
•Position (X Axis)Adjusts the object's horizontal position.
•Position (Y Axis)Adjusts the object's vertical position.
•Position (Z Axis)Adjusts the object's depth.
•Rotation (X Axis)Rotates the object horizontally.
•Rotation (Y Axis)Rotates the object vertically.
•Rotation (Z Axis)Rotates the object clockwise.
•Size (X Axis)Adjusts the object's horizontal size.
•Size (Y Axis)Adjusts the object's vertical size.
•Size (Z Axis)Adjusts the object's thickness.
Some accessories may display additional customizable options. These are listed as "02 Settings," etc.
The color can be adjusted via the Color tab.
Adjusting the object's Base Position changes the focal point that the object moves in tandem with.
The position, size, and angle of objects can be adjusted via the Settings tab.
- ■The Axis: You can directly control object position with the Axis.
-
①Enable the Axis.An axis controller will appear when you enable the "Display Axis" box.
With this enabled, you can left-click and drag the mouse to move and rotate the accessory.
②Move/RotateSwitches between types of Axis movement.
③Speed/Size・Speed Affects how quickly the object will move when manipulated.
•Size Affects the size of the Axis.
- ●Make Copy: This option allows you to duplicate accessories or copy customized accessory settings into another accessory slot.
-
① Menu SelectionAfter customizing an accessory, select "make Copy" from the menu on the left.
② Copy Source SelectionSelect the Accessory Slot to copy the values from.
③ Copy Destination SelectionSelect the Accessory Slot to copy the values to.
④ Apply ButtonCopies the accessory in the Copy Source to the Paste Destination.
•Flip Position For objects with left/right base positions (e.g. ears), enabling this and selecting "Copy slot" will copy the accessory, but with the opposing base position.
Copy Source Values •Settings Copies only the adjusted values from the copy source.
•Reverse (←→)Flips the Rotation value (Rotate Y) in the copy source and copies it to the copy destination.
•Reverse (↑↓) Flips the Rotation value (Rotate X) in the copy source and copies it to the copy destination.
■Saving and Deleting Outfits: Outfits allow you to manage custom combinations of clothes and accessories.
- ●Creating New Outfit Cards
-
① Category SelectionSelect the Options icon from the Main Menu.
② Menu SelectionSelect "Save/Delete" in the Outfit Card sub-category.
③ Action OptionsSelect "Save As New" in the Customization Panel. A window to name this outfit will be displayed.
④ Name Entry FieldEnter an outfit card name.
⑤ Confirm ButtonSelect "Confirm" to save the outfit card.
Outfit cards are saved in the "Coordinate" folder.
- ●Overwriting Outfit Cards
-
① Category SelectionSelect the Options icon from the Main Menu.
② Menu SelectionSelect "Save/Delete" in the Outfit Card sub-category.
③ Target SelectionSelect the outfit card to overwrite from the Outfit Card List.
④ Action OptionsSelect "Overwrite." A confirmation window will be displayed.
⑤ Name Entry FieldEdit the outfit card name (optional).
⑥ Confirm ButtonSelect "Confirm" to overwrite the outfit card.
- ●Deleting Outfit Cards
-
① Category SelectionSelect the Options icon from the Main Menu.
② Menu SelectionSelect "Save/Delete" in the Outfit Card sub-category.
③ Target SelectionSelect the outfit card to delete from the Outfit Card List.
④ Action OptionsSelect "Delete." A confirmation window will be displayed.
⑤ Delete ButtonSelect "Delete" on the confirmation screen to delete the selected outfit card.
Warning: This will delete the outfit data from your computer, not just the game.
■Loading Outfits: You can load saved outfit cards in full, or only certain aspects of them.
-
① Category SelectionSelect the Options icon from the Main Menu.
② Menu SelectionSelect "Load" from the Outfit Card section of the menu.
③ Target SelectionSelect the outfit to load from the Outfit Card List.
④ Category to LoadCustomize the parts of the outfit to load.
⑤ Action OptionsLoads the selected Outfit.
■Character Settings: These settings allow you to adjust a character's name, voice, and other settings.
-
① Category SelectionSelect the Character Settings icon from the Main Menu.
② Character ProfileSub-categories in the Character Settings menu can be adjusted.
•Character Determines various character profile.
├ SettingsSets the character's name and birthday.
└ Type Determines the character's personality and voice. A voice sample will play when selecting one.
③ Traits ・Traits Determines various characteristics.
├ Quirk Affects character lifestyle.
├ Mood How they feel toward the player. Affects dialogue and interactions.
└ Kink Affects sex and sex results.
④ Other SettingsIn the "Other Settings" section, you can add the "Fang" and "Futanari" attributes.
■Saving/Deleting Characters: When saving a character, you must also create a preview portrait.
- ●Saving New Characters
-
① Category SelectionSelect the Options icon from the Main Menu.
② Menu SelectionSelect "Save/Delete" in the Character Card sub-category.
③ Action OptionsSelect "Save As New" in the Customization Panel to open the Photo Mode.
④ Camera MenuCustomize your character's portrait by adjusting their expression, pose, the portrait frame, etc. with these options.
⑤ Picture FrameUse the camera to adjust the character's position etc. within the frame.
⑥ Snap a Picture and SaveClick this to create the character card.
Character cards are stored in the "Chara" folder.
- ●Overwriting Characters
-
① Category SelectionSelect the Options icon from the Main Menu.
② Menu SelectionSelect "Save/Delete" in the Character Card sub-category.
③ Target SelectionSelect the character card to overwrite from the list.
Note: Characters assigned to a group or player cannot be deleted.
Note 2: Overwriting a character will revert their parameters to default values.
④ Action OptionsSelect "Overwrite." A confirmation window will be displayed.
⑤ OverwriteSelect "Change and Save" to move to the Photo Mode.
Be aware that character data will be overwritten when you save in the Photo Mode.
- ●Deleting Characters
-
① Category SelectionSelect the Options icon from the Main Menu.
② Menu SelectionSelect "Save/Delete" in the Character Card sub-category.
③ Target SelectionSelect the character card to delete from the list.
④ Action OptionsSelect "Delete." A confirmation window will be displayed.
⑤ Delete ButtonSelecting "Delete" on the confirmation screen will delete the character card.
Warning: This will delete the outfit data from your computer, not just the game.
■Loading Characters: Saved characters can be loaded in their entirety, or you can load just their outfit or appearance.
-
① Category SelectionSelect the Options icon from the Main Menu.
② Menu SelectionSelect "Load" in the Character Card sub-category.
③ Target SelectionSelect the character card to load from the list.
④ Category to LoadCustomize the character properties to load.
⑤ Action OptionsClick here to load the selected character data.
Be aware that any unsaved customizations/data will be lost upon loading.
■Merging Characters: Two characters can be merged, combining aspects of each of them to create a new whole.
-
① Category SelectionSelect the Quick Creation icon from the Main Menu.
② MergeSelect "Merge" in the Character Card sub-category.
③ Character Card ASelect the first character (character A) from the list.
④ Character Card BSelect the second character (character B) from the list.
⑤ Fuse ButtonClick here to merge character A and character B.
⑥ Fused CharacterYou will see the newly-created character here.
Note that outfits will not be mixed and matched. The final outcome will use one of the two characters' outfits in its entirety.
⑦ Exit ButtonClick here to exit the Merge screen.
■Generate Image:This allows you to specify a character type and general appearance during Quick Creation.
-
① Category SelectionSelect the Quick Creation icon from the Main Menu.
② Generate ImageSelect "Generate Image" in the Character Card sub-category.
③ OptionsSelect the options that match the character you want to create.
④ Generate (All Conditions)Generates a character using all of your selected specifications.
⑤ Randomize ImageRandomizes options in the Image window and generates a character.
⑥ Randomize AllRandomizes all options and generates a character.
⑦ ResetReverts to the state before generating a character.
⑧ Generate ImageClick here to exit the Generate Image screen.
■Creating Male Characters: Character creation for both male and female characters is almost exactly the same.
■Futanari Characters
-
Checking the "Futanari" box will allow you to choose that female character as a playable character.
For more information, see "Selecting a Character."
*Enabling this will not affect the character when they are selected as a sexual partner.
The Uploader
-
Uploader is a free additional data feature.
Please download it from this page.
- ■The Uploader allows you to upload data you created, or download data uploaded by others.
-
To use the uploader, you need to register your handle name.
Enter the "handle name" and select "Apply".
- ○The Uploader:Here you can upload data created in game.
-
① Toggle Data DisplayAdjusts the type of data displayed in ②Data List.
Displays a list of male characters.
Displays a list of female characters.
② Data ListDisplays a list of created data.
③ Data PreviewDisplays a preview image of the data selected in ②Data List.
④ CommentEnter a comment for the data to upload here. Cannot be left blank, max character limit of 80.
⑤ UploadUploads the data.
・The button will display "Update" instead of "Upload" for characters that have been uploaded before.
⑥ DownloaderSelecting this brings you to the Downloader screen.
- ○The Downloader:Here you can view a list of data others have uploaded and download it.
-
①Shared Menu・Information on Selected DataDisplays information on the data selected in ②Data List.
・MenuChanges for the selected content.
・Search FiltersAdjusts the search conditions to filter displayed results in ②Data List.
・The UploaderSelecting this brings you to the Uploader screen.
・TitleSelecting this returns you to the Title screen.
②Data ListDisplays a list of uploaded data.
③Navigate PageNavigates between pages on the ②Data List.
・ / Move to previous/next page.
・ / Move to first/last page.
・ x/xDisplays the current/total page #.
④ System・DownloadDownloads the data selected in ②Data List.
・Update ListReconnects to the uploader to update with the latest data.
・Delete CacheDeletes the cache for the currently active downloader.
Image data you have viewed is saved in your game's cache. Deleting this data will free up memory on your HDD, but may cause image data to load more slowly.
- ○Data Uploaded:Check data you've uploaded here, or delete data from the Uploader.
- ①Data ListDisplays a list of uploaded data.
② DeleteDeletes the selected data from the uploader.
Dialogue Events
-
When starting the game for the first time, story dialogue will play before sex scenes.
Your partner's attitude and dialogue will change depending on their current stats.
If a multiple choice is presented, mouse over and click one of the options.
My Room
This is your home base, the place from which you can prepare for your Honey Life. (The game auto-saves every time you finish having sex and return to your room.)
-
Group 〇 ActiveDisplays the current active group.
Characters in the active group are the only ones available for meetups, or for encountering in the various game locations.
■ Leave RoomLeaves your room to initiate sex with a partner in the active group.
・Meet Up Head to the lobby to pick a partner to have sex with.
・Explore the Building Head to a location to meet with a partner. Conversation and sex are both available.
■ Manage CharactersManage characters and customize groups.
-
■ Call PalCall Pal to assist you.
■ SleepGoing to sleep moves time forward. You may even get a visit from a partner...?
■ OptionsOpen the Settings screen to customize game settings.
(Back)Selecting this returns you to the Title screen.
■ Manage Characters : Create and edit characters, customize groups, and otherwise manage your characters.
- Create CharacterTakes you to the specified character editor. You can create character cards here.
Community Assigns a saved character to a group, enabling you to initiate sex with them.
Select Player Selects the player character.
(Back) Returns you to the My Room screen. - ■ Community: Assign characters to and manage groups. A group can contain a maximum of 20 characters.
-
① Select GroupSelect one of these icons to switch between active groups.
The group selected here is the active group, and characters assigned to it become available to meet.
② Select Character to AssignSelect a character from the list here to assign to the current group.
③ Character InfoDisplays information on the selected character.
④ AssignAssigns the character selected in ① to the group selected in ②.
⑤ Assigned CharactersDisplays a list of characters assigned to this group.
⑥ Remove Character From GroupRemoves the character selected in ⑤ from the group.
- ■ Select Player: Select the character to play as.
-
① Select 1P or 2PSets the primary character to use as your avatar in game.
*Unlocking in-game achievements will enable threesomes, and the ability to choose a second player character for use during them.
② Select GenderYou can select the gender of the character to play as here.
Displays a list of male characters.
Displays a list of female characters.
*Only female characters with the "Futanari" setting enabled can be chosen.
③ Select CharacterSelect the character to play as here.
④ AssignClick "Confirm" to set the selected character as the player.
⑤ Active CharacterDisplays the current player character.
■ Call Pal: Pal can be called to assist you with a variety of your needs.
-
■ HelpView tutorials on how to play the game.
■ Achievements/RewardsComplete milestones to unlock achievements and earn Points (Cookies).
Trade Points for bonus rewards, such as new game mechanics, sexual positions, etc.
■ Customize Pal's AppearanceCustomize Pal's appearance. (You will be taken to the character editor.)
(Back) Returns you to the My Room screen.
- ■ Achievements/Rewards:Complete milestones to unlock achievements and earn Points (Cookies).
-
Trade Points for bonus rewards, such as new game mechanics, sexual positions, etc.
① Current Reward Point TotalThis displays the amount of points you have.
Points are earned automatically when you complete Achievements.
② RewardsLeft-clicking a Reward will subtract the Required Points (right column) and unlock it.
③ DetailsMouse over an Achievement to display the conditions you must fulfill to earn it.
Mouse over a Reward to see its effects.
The Lobby
Select a partner and a map and initiate a sex scene.
-
① Select Partner 1Displays a list of characters in the active group.
② Select CharacterSelect the partner to have sex with.
Note: A second partner (threesomes) will be available after earning the corresponding Reward.
Specifying a second partner will unlock threesomes and girl-on-girl sex options during sex scenes.
③ Character ViewerDisplays the currently selected character.
④ StatsDisplays the stats of the currently selected character.
Earning certain Rewards allows you to customize some character parameters here.
⑤ ItemsYou can use items to change how partners behave.
This option is unlocked by earning certain Rewards.
⑥ Initiate SexMoves you to the Map Selection screen.
⑦ Select MapSelect the map to have sex in here.
*Only event maps are available for events (e.g. bathing, bathroom events).
**Bathroom and bath events are only available when triggered (not normally accessible).
***Locked maps can be unlocked by progressing through the game.
⑧ Confirm Map and BeginInitiates the sex scene.
(Back)Returns to the previous screen.
Explore the Building
You can explore the building to meet up with your partners.
-
① PlayerThis is your player character.
You can control them by using either the keyboard or the mouse.
② IconWhen an icon appears above your character's head, it means you can take some sort of action.
The ? IconDisplayed when you can take a basic action.
The ! IconDisplayed when you can begin a special event.
The Door IconDisplayed when you are in front of a map transition.
③ PartnersApproach potential partners on the map to initiate an action involving them.
The character you are interacting with will react differently depending on the action you take.
*Only characters in a currently active group (set in your room) will appear on the map.
④ Character InfoDisplays the status of the character directly in front of you.
⑤ Actions ChatBegins a conversation with this character.
LeaveEnds the interaction and returns you to the map.
Have SexInitiates sex after choosing a map.
Select as Partner 1Unlocking certain achievements will enable you to suggest threesomes. To have a threesome, you will need to ask two separate partners to participate first.
Free Sex
This option allows you to enjoy sex with your choice of character and map.
-
① Select FemaleSelect a female from the game's "chara" folder, and set their status here.
Note: A second partner (threesomes) will be available after earning the corresponding Reward.
Specifying a second partner will unlock threesomes and girl-on-girl sex options during sex scenes.
② Select MaleSelect a male from the game's "chara" folder, and set their status here.
Note: A second partner (threesomes) will be available after earning the corresponding Reward.
Specifying a second partner will unlock threesomes sex options during sex scenes.
③ Select MapMoves you to the Map Selection screen.
④ Select a MapSelect a location from the Map List here.
⑤ Confirm Map & BeginInitiates a Sex Scene with the selected settings.
(Back)Returns to the previous screen.
Sex Scene
- ① Sex CategoryToggle between sexual categories. Selecting one opens up a list of available sex positions.
② Sex PositionSelect the desired sex position here.
③ Character ViewerYou have full 360 degree control of your camera here.
④ Control TooltipDisplays controls for the sex scene.
⑤ Sex LocationAllows you to move to set points on the map, or manually adjust your position. - ⑥ Pleasure Gauge/Finish Button
-
⑦ Sex Options Adjust your partner's clothing.
Hide/display your partner's accessories.
Change the player or partner's appearance by loading an outfit card.
*Select a character name to specify who changes apply to.
Adjusts gloss/wetness/lethargy. Only available after unlocking the corresponding Reward.
Adjusts scene lighting.
Adjusts visual effects.
Open the Settings screen to customize game settings.
⑧ Exit Sex SceneExits the sex scene and takes you back to the My Room screen.
- ■ Sex Scene Controls: Caress/Masturbation
-
1. Begin caress and raise your partner's Pleasure Gauge.Adjust speed to find the right pace, and watch the gauge go up.2. Your partner will climax once the gauge fills up.
- ■ Sex Scene Controls: Foreplay
-
1. Begin foreplay and watch your Pleasure Gauge increase.2. The Orgasm Button will display once the gauge reaches the marker point.3. Select the Orgasm Button to climax.
- ■ Sex Scene Controls: Penetration
-
1. Begin foreplay to raise the Pleasure Gauge.Adjust speed to find the right pace, and watch the Gauge go up.2. The Orgasm Button will display once the gauge reaches the marker point.
3. Select the Orgasm Button to climax.
Pull out after cumming together, and...
Sex Location : Allows you to move to set points on the map, or manually adjust your position.
-
① Switch PointsSwitches between preset locations on the map.
② Manual MovementManually move your location.
Selecting this displays ③.
- ③ Movement ControlsLeft-click and drag on each icon to move/rotate.
Left/Right/Front/Back
Up/Down
Rotate
Adjust movement speed
Visual Effects : You can control the game's visual effects.
-
① Toggle Visual SettingsSelecting this opens a menu to customize visual settings.
② Visual Effect MenuA menu that controls various visual options. (Connects to ③)
③ Configure Visual OptionsA second menu that controls various visual options.
■PresetsSave and load visual configuration layouts.
*Configuration files are saved in the "ScreenEffect" folder.
■BloomAdjusts light blurring.
■Depth of FieldAffects blurriness of objects as they grow more distant from the camera.
-
■VignettesDarkens the edges of the screen.
■SSAOAdjusts shadow effects.
■FogConfigures fog.
Character Stats
Character stats change based on sexual choices and player actions. Stats affect interactions with the player.
-
① StatsDisplays the character's current Attitude.
LockPrevents the stat from changing. Unlocked by Rewards.
② ProfileThese settings are configured in the character editor.
③ Sexual ExperienceThis area displays how experienced the character is in various types of sex. Once a gauge is maxed, they achieve "Pro" status.
If a partner isn't used to a type of sex, they may not like it much yet, and will only enjoy slow and steady sex. Once they are Pros in that type of sex, their reactions will change.
*Painful acts like spanking cannot induce orgasm unless the character has the "M" Kink or is a Pro in Rough sex.
**Experience needed to attain Pro status may vary by character personality/traits.
④ Worn Out / Obsessed Some special sexual events may trigger based on character Attitude.
*When a character is Worn Out, they will remain so until this gauge reaches 0.
●Stats : Determines how the character feels about and acts toward the player.
-
Attitude List
Base Attitude is set during character creation, but will change based on sexual and dialogue choices.*Some special sexual events may trigger based on character Attitude.
**When a character is Worn Out, they will remain so until this gauge reaches 0.
●Events : A variety of events can trigger based on a partner's mood. Bathroom, bathing, sleeping, night visits, etc.
-
Only event sexual positions can be chosen during an event.
- ■ Pattern 1: Bathroom Event
-
1.That girl's heading to the bathroom...2.Select "Toy with her" at the door3.Start a special sex event!
- ■ Pattern 2: A Garden for Two
-
1.Spot someone in the garden while exploring2.Ask for sex, and...3.An outdoor threesome!
- ■ Special Event: Running Away
-
If a character dislikes you for long enough, they may decide to leave. A choice will present itself, and if you ignore them, they may never come back...
Once a character leaves, they will be removed from any groups and their stats will be reset.
-
Your date doesn't show...What to do...Go after herForget about herIt looks like she's left for good...
Keyboard Shortcuts
-
Press the F2 key to open the shortcut menu. *Note that screenshots are saved to the UserData->cap folder in your installation directory.■ Character Creation Keyboard Shortcuts
■ Sex Scene Keyboard Shortcuts
■ Map Exploration / ADV Scene Keyboard Shortcuts
Options
-
① MenuClick a category to display it.
②ExitExits the Options menu.
③Settings ■Title Settings: Allows you to configure Title screen display settings.
・Display CharacterEnable this to display a character on the Title screen.
・LoadUse this to choose the character to display.
Fur will be displayed by default if no characters are specified.
■Camera Settings: These affect camera controls.
■Screen Settings: Adjusts screen resolution and Windowed Mode settings.
■Graphic Settings: These affect game visuals.
These settings affect game performance. If your game runs slowly, disabling some of these may help improve performance.
•QualityAdjusts the overall level of graphic quality.
•SSAOAdjusts shadow effects.
•FogConfigures fog.
•Depth of FieldAffects blurriness of objects as they grow more distant from the camera.
•BloomToggles gradation and blurring from lighting effects.
•VignettesDarkens the edges of the screen.
•Environmental LightingAdjusts the light source.
•MapToggle the map.
•ObstructionsAffects whether objects between your POV and the camera are displayed.
•Background ColorAdjusts the color of the background shown when no other background is available.
■Audio Settings: These affect the volume of the BGM and SE.
■Voice Settings: Allows you to configure voice settings by personality.
■Text Settings: Allows you configure text display settings during dialogue scenes.
■Game Settings: These affect various aspects of gameplay.
•Display Pleasure GaugeToggles the display of the Pleasure Gauge.
•Control TooltipToggles display of control tool tips on screen.
•Reset Camera DeterminationEnabling this automatically sets the camera to a predetermined angle when changing sex positions.
・Display PlayerToggles the display of the player 1.
・Display Player PenisToggles the display of the player 1 penis.
・Display Player ClothesToggles the display of the player 1 clothing.
・Display Player AccessoriesToggles the display of the player 1 accessories.
・Display Player ShoesToggles the display of the player 1 shoes.
・Display Player 2Toggles the display of the player 2.
・Display Player 2 PenisToggles the display of the player 2 penis.
・Display Player 2 ClothesToggles the display of the player 2 clothing.
・Display Player 2 AccessoriesToggles the display of the player 2 accessories.
・Display Player 2 ShoesToggles the display of the player 2 shoes.
・Display Player Base ColorToggles whether the player is displayed as a simple color, and what that color is.
・Cum/Urine/SquirtingToggles the display of these effects.
•Eyes Track Camera (Char 1)Adjusts the direction NPC 1's eyes are looking.
•Head Tracks Camera (Char 1)Adjusts the direction NPC 1's head faces.
•Eyes Track Camera (Char 2)Adjusts the direction NPC 2's eyes are looking.
•Head Tracks Camera (Char 2)Adjusts the direction NPC 2's head faces.
Troubleshooting
-
If the game won't run, or if the game doesn't work properly even when following the instructions in the manual, try one of the following common solutions.
Problem : The game won't load, it suddenly freezes, or it runs poorly.When the game won't run properly, it's usually because your system doesn't meet the minimum system requirements.
Before you try anything else, double-check to make sure your computer is powerful enough to run HoneyCome.
You can find HoneyCome's system requirements on your game's packaging, or see them here.
Warning: Follow the suggestions below at your own risk.
ILLGAMES cannot be held responsible for any problems that occur from installing drivers. We will do our best to provide technical support, but any accidents that occur are the user's responsibility.
If you are unsure of how to install drivers or perform any of the following tasks, please contact your computer manufacturer for assistance.
(1) Update graphics card drivers
If your computer meets the game's system requirements but the game has trouble running, the problem is often out-of-date graphics drivers.
For information on how to update your graphics card drivers, please contact your computer or graphics card manufacturer for assistance.
You can also try changing the game's Options to switching graphics settings, or changing to Windowed Mode.
(2) Disable background programs
Antivirus software and other background programs may interfere with the game's performance. Temporarily disable these types of programs before booting the game.
For information on how to disable these programs, please refer to the corresponding software's manual.
(3) Update computer drivers
The motherboard or sound card may be causing the problems you're experiencing.
Try updating all your computer's drivers to the latest versions.
For information on how to do this, please contact your computer or hardware manufacturer for assistance.
(4) Reinstall Windows
Windows itself could be experiencing problems. Backing up your computer, reformatting your hard drive, and reinstalling Windows may solve the problem.
Warning: Take great care to fully backup all of your data first. ILLGAMES cannot be held responsible for any loss of data.
For information on how to reformat your hard drive and reinstall Windows, please contact Microsoft for assistance.
-
If you're still experiencing problems...The solutions listed above should solve most problems that you may experience. If you have any questions, please send an e-mail to our Online Support.
When you send an e-mail, save and include a copy of your System Information details, or include a text file with your system information.
E-Mail : support@illgames.jp
-
Privacy PolicyILLGAMES handles all personal information, such as names, addresses, and e-mail, with the utmost care, and will not share your information with any third parties.